People are getting increasingly frustrated with rubber cement paint, especially in China.
According to the Guardian, the use of cement paints for home decorating has become a “national obsession” in recent years and people are increasingly finding ways to make their own.
The problem is that the paint is not always safe.
While most of the time it is not toxic, some of the paints can be very harsh and are known to contain ingredients that can lead to cancer.
Here are three tips on how to safely make your own rubber cement.
What you need: 2-3 tablespoons of lime oil (about half a can) (depending on how thick you want the paint to be) – you’ll need about a teaspoon per square inch to make 1-2 inches.
(This can be made with regular old oil, or you can add water to the mix.)
A cup of vinegar (about a quarter cup) – this is also very helpful, since the paint contains sodium hydroxide, which can be toxic.
Some people like to add it to their baking soda (if they have it) and the vinegar will help keep the paint from getting too cloudy.
(If you don’t have it, try this: mix a tablespoon of baking soda with a half cup of water and mix it well.
You’ll be surprised at how much better the paint looks!)
A small container (about the size of a wine glass) – to make one half-gallon of paint, use a gallon-size jar.
(It should be about 2 cups.)
You can use any container that you’d like.
If you don, use an old, plastic bottle with a stopper.
This will keep the water out of the paint.
Some people use a brush to make the paint, but this is not recommended.
Instead, you can use your fingernail or your hand to make a paste with your fingers, then dab it into the paint (to help the paint adhere to the surface).
The first step is to use the lime oil.
This is the same oil used in many paints.
Mix it in with your vinegar and your vinegar will keep it from sticking to the paint for a few days.
Then, add some salt to the mixture.
This can help the vinegar stay in the paint longer, and the salt will keep things from sticking.
You can also add some baking soda to the vinegar to help it adhere to paint.
It can also help the glue stay on the paint if it’s too dry.
This mixture can take about a week or so.
Then, you’ll want to add your water.
You want the water to be about 1/3 to 1/2 the volume of the lime mixture.
If it’s not, you’re probably not going to be able to use it to make much of a difference.
Once the water is added, the vinegar can be added.
When you add the water, you will notice the paint start to stick to the plastic and stick to your fingers.
To make sure you’re not making any major mistakes, add a couple of drops of rubbing alcohol and mix well.
(Be sure to mix it all well so that you don and do not mix any of the other ingredients in the mix, since that could change the taste of the paste.)
When the mixture is dry, you may want to leave it in the bottle for a while to let the vinegar harden and give the paint a good bonding experience.
After you’ve finished mixing it up, put it in a plastic bag and seal it with a cap.
Then put it back in the fridge to harden.
Finally, take it out and use a screwdriver to gently loosen the paint into a nice, clean square.
If you can, you might also like to cut the corners off of the plastic, so that it won’t stick to itself as easily.
For more tips on home decor, read our previous article about using rubber cement for nail polish.